ET-100-6 : The "Original" TestMate®

Schroeder's original TestMate® system was patented EasyTest™ fitting provides the hyrdraulic user with a quick, convenient method to test, troubleshoot, and obtain preventive maintenance data on hydraulic systems.  Flows up to 100gpm and pressures up to 6000psi, as well as operating temperature, are measured through an EasyTest™ fitting, which is permanently installed in the hydraulic system.

click here to contact Schroeder regarding this product
 

HMG 3000 Data Recorder

The HMG-3000 is user-friendly by virtue of its easy-access selection menus leading to all of the unit's functions and settings.  The unit features a combination keyboard for entering numeric values and text.

click here to contact Schroeder regarding this product

 

TestMate® Contamination Monitor (TCM)

Schroeder's TestMate® Contamination Monitor (TCM) i s the newest generation of particle monitors that continuously measure solid contamination in fluid.  Encolded in a 4-inch diameter case, the TCM utilizes an optical sensor and measures particles in four sizes: >4, >6, >14 and >21 microns.  Measurement results can be output as a contamination code according to ISO 4406: 1999 or SAE AS 4059 (D).

click here to contact Schroeder regarding this product

TestMate® In-Line Counter (TIM)

The TIM from Schroeder is an in-line contamination counter capable of transmitting information regarding fluid cleanliness in various formats to a wide variety of devices in real time. Software is included to transmit data to a PC.  Alternative user-supplied output devices include PLCs, individual display units, and warning lights via trigger points.  This unit is intended for critical systems where continuous contamination monitor is a must.

click here to contact Schroeder regarding this product

TestMate® Metallic Sensor (TMS)

Features

• Early detection of imminent gear unit damage
• Prevention of expensive plant downtime
• Optimal supplement to optical sensors
• Measurement of metallic particles (ferromagnetic and nonferromagnetic) >200
• Measurement result is not affected by air bubbles or liquid contamination in the liquid

click here to contact Schroeder regarding this product

TestMate® Monitoring Unit (TMU)

The TestMate® Monitorinig Unit TMU series combines the advantages of the portable contamination measurement units with the measurement technology of the TestMate® Contamination Monitor (TCM) and the TestMate® Water Sensor (TWS).

click here to contact Schroeder regarding this product

 

TestMate® Particle Counter (TPM)

The TPM is a portable particle counter with an integrated pump that can be used in-line to measure contamination levels of hydraulic fluids.  Particles are measured at the 4,6, and 14 micron sizes, with results available in ISO 4406 (1999) and SAE AS 4059, as well as several other options.  Various programming options are available, including the ability to activate or de-activate system functions when contamination reaches a user-specified level.  It is equipped with a built-in printer to provide instant documentation and an RS-232 serial port for data transfer.  A custom software package is also included for trend analysis on a PC.

click here to contact Schroeder regarding this product

Testmate® Sensor Unit (TSU)

Applications

• Lubications systems in paper, steel and energy sectors
• Preventive, pro-active preparation of service/intervals
• Monitoring of component cleanliness on test benches
• Monitoring of oil cleaniless in storage tanks

 click here to contact Schroeder regarding this product

 

TestMate® Water Sensor (TWS-C)

The TWS-C is a saturation and temperature sensor for the monitoring of hydraulic and lubrication fluids accurately, continuously and on-line.  It measures the water content relative to the saturation concentration (saturation point) and outputs the degree of saturation (saturation level) in the range of 0 to 100% as a 4 to 20 mA signal. A reading of 0% would indicate the absence of water, while a reading of 100% would indicate that a fluid is saturated with water.

click here to contact Schroeder regarding this product