TestMate™ SeriesTPM: TestMate™ Particle Monitor The TPM is a portable particle monitor with an integrated pump that can be used in-line or with bottled samples to measure contamination levels of hydraulic fluid. Particles are measured at the 4, 6, and 14 micron sizes, with results available in ISO 4406 (1999) and SAE AS4059 as well as several other options. It is equipped with a built-in printer to provide instant documentation and an RS-232 serial port for data transfer. A custom software package is also included for trend analysis on a PC. Click here to view CatalogTIM: TestMate™ In-Line Contamination Monitor The TIM is an in-line contamination monitor capable of transmitting information regarding fluid cleanliness in various formats to a wide variety of devices in real time. Software is included to transmit data to a PC. Alternative user-supplied output devices include PLCs, individual display units, and warning lights via trigger points. This unit is intended for critical systems where continuous contamination monitoring is a must. Click here to view CatalogTCM: TestMate™ Contamination Monitor The TestMate Contamination Monitor optically measures solid particle contamination in hydraulic and lubricating fluids. The TCM is among the newest generation of particle monitors that continuously measure solid contamination in fluid. Enclosed in a 4 inch diameter case, the TCM utilizes an optical sensor and measures particles in four sizes: >4, >6, >14 and >21 microns. Measurement results can be output as a contamination code according to ISO 4406 : 1999 or SAE AS 4059 (D). The TCM is designed for connection to hydraulic and lubrication lines with pressures up to 1450 psi (100 bar) and viscosities up to 4635 SUS (100 cSt). A small flow of oil (between 30 ml/min and 300 ml/min) is diverted for measurement purposes. Download Literature on the TCM Download Firmware Update for with TCM - Software Updated (April 2007) Download new 2.22 version CoCoS 1000 PC Software Click here to view CatalogSMART® Kit The Schroeder SMART® Kit is the perfect solution for measuring contamination levels in your hydraulic and lubricating oils. This unit comes complete with the Schroeder TestMateTM Contamination monitor, making it easy to continuously monitor ISO levels in real time, showing you exactly how dirty your fluid is. This kit can be added as a retrofit to any Schroeder’s Standard Filtration Carts (MFS/MFD), Kidney Loops (KLS/KLD) or Skids without any additional modifications. Carts and Kidney Loops can also be ordered with the SMART® Kit included. These configurations are known as Mobile SMART Filtration Systems (MSS/MSD) and Kidney Looop SMART Systems (KSS/KSD), respectively Click here to view CatalogTWS-C: TestMate™ Water Sensor The TWS-C is a water and temperature sensor for the continuous monitoring of hydraulic and lubrication fluids - accurately and on line. It measures the water content relative to the saturation concentration (saturation point) and outputs the degree of saturation level) in the range of 0 to 100% as a 4-20 mA signal. A reading of 0% would indicate absence of water, while a reading of 100% would indicate that a fluid is staturated with water. ET-100-6: The Original TestMate™Schroeder’s original TestMate system with the patented EasyTest™ fitting provides the hydraulic user with a quick, convenient method to test, troubleshoot, and obtain preventive maintenance data on hydraulic systems. Flows up to 100 gpm and pressures up to 6000 psi, as well as operating temperature, are measured through an EasyTest fitting, which is permanently installed in the hydraulic system. Click here to view Catalog
|
|
Schroeder Industries |
Element Cross-Reference
Find Your Distributor
PDFs and Manuals to save